45
10. CONNECTING TO EXTERNAL DEVICES
6. Set "Mode" in the "Bluetooth" tab to "Master".
7. Select a companion device from among the
Bluetooth devices already registered in "Link".
8. Set "Authentication" to "Yes" or "No".
"PROCEDURE Set Bluetooth
communication mode to "Slave"" Steps 3 to
4
9. Press [OK] to finish settings. Move on to the
Bluetooth communication.
"10.2 Communication between the OS and
Companion Device"
PROCEDURE Displaying Bluetooth information for the OS
1. Select "Comms" in Config mode.
2. Press [Info] in the "Bluetooth" tab to display
information for the OS. Register the Bluetooth
address (BD ADDR) displayed here in the paired
device set as "Master".
Bluetooth device address
This is a number unique to one particular Bluetooth device used to identify devices during
communication. This number consists of 12 characters (numbers 0 to 9 and letters from A to F).
Some devices may be referred to by their Bluetooth device address.
To Next Page
Loading...
Need help?
General
