10. CONNECTING TO EXTERNAL DEVICES
50
2. Press { } while pressing {ENT} to display a
message box asking whether to boot USB mode,
then press [NO].
The synchronous software is effective.
• OS may not be displayed as <Removable Disk>.
It depends on Windows settings.
Follow the instructions below to ensure that the
OS continues to operate normally during USB
transfer.
• Do not change the folder hierarchy or folder
names in <Removable Disk>.
• Do not format the "removable disk" on the
computer.
3. If synchronous software displays a partner setting
screen on the computer and asks whether to set a
partner device, press [NO].
• A partner setting screen may not be displayed
depending on the synchronous software
settings.
4. Disconnect the USB cable to exit mobile mode
connection.
To Next Page
Loading...
Need help?
General
