15
PREPARATONS BEFORE USE
PREPARATONS BEFORE USE
INSTALLING THE INSTRUMENT
1 Tighten the locking knob.
2 Firmly hold the instrument at the specified positions and install it on the instrument table.
For the instrument table, refer to "OPTIONAL ACCESSORIES" on P.75.
3 After installation, loosen the locking knob completely.
This allows the instrument to move.
Use the leveling knobs on the instrument's feet to prevent drifting of the instrument.
4 Fine level adjusting can be performed at each foot. Maintain the length within 1cm.
CAUTION
To avoid injury and/or damage to the instrument, hold the instrument in
the specified position and be careful not to shake or move it suddenly.
CAUTION
When carrying the instrument, be careful not to drop or tip it over. Be
careful to prevent your hand from being pinched by the instrument. If
not, you may be injured.
Locking knob
Proper way to hold the instrumentPlace to be held
To Next Page
Loading...
