65
SPECIFICATIONS & PERFORMANCE
ELECTRIC RATING
Source voltage : AC100V-240V, 50Hz/60Hz
Power input : 65VA for normal use, 190VA at its maximum
SYSTEM CLASSIFICATION
• Types of protection against electric shocks:
This instrument is classified as Class I equipment.
Class I equipment does not depend only on basic insulation for protection against electric shocks,
but also provides a means of connection to a protective grounding system so that metal parts that
come into contact do not become conductive while the basic insulation is in failure.
• Grade of protection against electric shocks:
This instrument is classified as Type B equipment.
Type B equipment provides a specified grade of protection to prevent electric shocks, particularly for
reliability against current leaks, measuring current and protective earth current (in case of Class I
equipment).
• Degree of protection against harmful ingress of water: IPx0
The SP-3000P has no protection against ingress of water. (The degree of protection against harmful
ingress of water defined in IEC 60529 is IPx0.)
• Classification according to the method(s) of sterilization or disinfection recommended by the manu-
facturer: not applicable.
The SP-3000P has no part to be sterilized or disinfected.
• Classification according to the degree of safety of application in the presence of a flammable anes-
thetic mixture with air or with oxygen or nitrous oxide: Equipment not suitable for use in the presence
of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
The SP-3000P should be used in environments where no flammable anesthetics and/or flammable
gases are present.
• Classification according to the mode of operation: Continuous operation.
Continuous operation is the operation under normal load for an unlimited period, without the speci-
fied limits of temperature being exceeded.
DIMENSIONS AND WEIGHT
Dimensions : 275mm (W) × 507mm (D) × 446~474mm (H)
Weight : 22kg
PURPOSE OF USE
Used to photograph and record the corneal endothelium as an electronic image.
To Next Page
Loading...
