27
6. BASIC OPERATION
Setting Upper/Lower laser and Centerline LED automatic power off
• When you want to activate "automatic power off (after 30 minutes)" for Upper/Lower laser, set this function.
(TP-L6WGV/WAV only):
"V-LD" is indicated on the screen.
• When you want to activate "automatic power off (after 30 minutes)" for Centerline LED, set this function.
(TP-L6WG/WBG/WA/WB only):
"V-LED" is indicated on the screen.
Factory setting : [30]
Set [NO], and this function is invalidated.
* 1: Press [Menu mode] key, and the instrument returns to the “Basic screen” status.
* 2: Press [Menu mode] key, and the instrument returns to the “Procedure 1” status.
* 3: The menu number is changed according to models.
Procedure Key operation Display
1. Press [Menu mode] key. *1
2. Press [Set/Lock] key. *2
3. Press [Down] key twice. *2
4. Press [Right] key or [Left] key to highlight
[NO]. *2
5. Press [Set/Lock] key.
The "automatic power off (after 30 minutes)"
function is invalidated.
To Next Page
Loading...
Need help?
General
