Topcon TP-L6 Series User Manual

36
7. SETTING SECURITY CODE
To prevent unauthorized use of the TP-L6W a four-digit security can be set. The following table
describes how to activate the security mode (S CODE) and select a four-digit code.
When Security mode is set, it is necessary to input the code every time power is turned on
(in Normal
mode, Selecting mode and Checking & Adjusting mode).

• Memorize the security code and file it in a safe place. It is not possible to operate the TP-L6W without entering
the code.
Procedure Key operation Display
1. Press [Menu mode] key.
2. Press [Down] key three times.
3. Press [Set/Lock] key.
4. Press [Set/Lock] key.*1
5. Select a numeric character by pressing the
[Up], [Down], [Right], [Left] keys.
Example: 4
6. Press [Set/Lock] key.
7. Repeat steps 5 and 6 to set remaining
three code numbers.
Example: 4852 *2
8. Select [ENT] by pressing the [Up], [Down],
[Right], [Left] keys.
MENU(1/5)* 3
BEAM SETTING
Three times
MENU(4/5)* 3
SECURITY
SECURITY(1/2)
INPUT S CODE
ENTER 01234
SECURITY 56789
CODE[ ] ENT
or
or
ENTER 01234
SECURITY 56789
CODE[ ] ENT
ENTER 01234
SECURITY 56789
CODE[4 ] ENT
ENTER 01234
SECURITY 56789
CODE[4852] ENT
or
or
ENTER 01234
SECURITY 56789
CODE[4852] ENT

Topcon TP-L6 Series Specifications

General

Brand	Topcon
Model	TP-L6 Series
Category	Measuring Instruments
Language	English