EN-73
9 Check lists
9.1 Check list for door system
Confirm features at start-up with a check mark.
No. Equipment Present? Features to be tested Note
1.0 Garage door
1.1 Manual opening and closing Smooth running
1.2 Fastenings/ connections State/ seat
1.3 Pivots/ joints State/ lubrication
1.4 Track rollers/ track roller holders State/ lubrication
1.5 Seals/ sliding contact strips State/ seat
1.6 Door frame/ door guide Alignment/ fastening
1.7 Door leaf Alignment/ state
2.0 Weight
2.1 Springs State/ seat/ setting
2.1.1 Spring strips State
2.1.2 Spring break device State/ rating plate
2.1.3 Safety elements (spring
connector,…)
State/ seat
2.2 Wire cables State/ seat
2.2.1 Mounting State/ seat
2.2.2 Cable drum
2.3 Fall protection State
2.4 Concentricity of T-shaft State
3.0 Drive/ control
3.1 Drive/ rail/ bracket
3.2 Electrical cables/ connections
3.3 Emergency release Function/ state
3.4 Control devices, push
buttons/hand transmitters
Function/ state
3.5 Limit stop State/ position
4.0 Safeguarding of crush and shearing zones
4.1 Force limit Stops and reverses
4.2 Protection against lifting of
persons
Door leaf stops at 20kg
4.3 Site conditions Safely distances
To Next Page
Loading...
