Toro 31598N - Checking the Hydraulic Lines and Hoses; Inspecting the Hydraulic-System Test Ports; Mower Maintenance; Pivoting (Tilting) the Front Mower Deck Upright

10.Starttheengineanduseallofthehydrauliccontrolsto
distributehydraulicuidthroughoutthesystem.Check
forleaks,thenshutofftheengine.
11.Checktheuidlevelandaddenoughtoraiselevelthe
leveltotheFullmarkonthedipstick.
Important:Donotoverll.
CheckingtheHydraulicLines
andHoses
ServiceInterval:Every2years—Replacemovinghoses.
Inspectthehydrauliclinesandhosesdailyforleaks,kinked
lines,loosemountingsupports,wear,loosettings,weather
deterioration,andchemicaldeterioration.Makeallnecessary
repairsbeforeoperatingthemachine.
Inspectingthe
Hydraulic-SystemTestPorts
Thetestportsareusedtotestthepressureinthehydraulic
circuits.ContactyourlocalTorodistributororrefertothe
ToroServiceManualforassistance.
MowerMaintenance
Pivoting(Tilting)theFront
MowerDeckUpright
Note:Althoughnotneededfornormalmaintenance
procedures,youcanpivot(tilt)thefrontmowerdeckupright.
1.Raisethefrontmowerdeckslightlyofftheoor.
2.Performthepremaintenanceprocedure;referto
PreparingtheMachineforMaintenance(page38).
3.Removetheretainerclipanddisconnectthedamper
assemblyfromthemowerdeck(Figure90).
Figure90
1.Damperassembly2.Retainerclip
4.Removethehairpincotterandclevispinsecuringthe
height-of-cutchainstotherearofthemowerdeck
(Figure91).
57