Toro groundmaster 7210 - Adjusting the Rollers

AdjustingtheRollers
Mounttherollersinthelowerpositionwhenoperating
inheight-of-cutshigherthan64mm(2-1/2inches)and
inthehigherpositionwhenoperatinginheightsofcut
lowerthan64mm(2-1/2inches).
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,andset
theparkingbrake.
2.MovethethrottlelevertotheSLOWposition,
stoptheengine,removethekey,andwaitfor
allmovingpartstostopbeforeleavingthe
operatingposition.
3.Raisethefrontofthemachineandsupportiton
jackstands.
4.Removethefastenerssecuringeachrolleron
yourmowerdeck,andmovetherollersupor
downasdesired;refertoFigure47through
Figure51asapplicableforyourmower.
g004487
Figure47
Allmowerdecks
1.Frontroller
2.Rollershaft
g004926
Figure48
Guardianmowerdecksonly
1.Bolt4.Nut
2.Rearunder-deckroller5.Bracket
3.Spacer
g004923
Figure49
Guardianmowerdecksonly
1.Bolt3.Nut
2.Frontunder-deckroller4.Bracket
g004925
Figure50
Side-dischargemowerdecksonly
1.Bolt4.Nut
2.Chute-sideroller
5.Bracket
3.Spacer
39