Toro MultiPro 1750 - Draining the Fuel Tank; Electrical System Maintenance; Electrical System Safety; Servicing the Battery

DrainingtheFuelTank
ServiceInterval:Every400hours/Yearly(whichever
comesrst)
Drainandcleanthefueltankifthefuelsystem
becomescontaminatedorifyouplantostorethe
machineforanextendedperiod.Usefresh,cleanfuel
toushoutthetank.
1.Transferthefuelfromthetankintoanapproved
fuelcontainerusingasiphonpump,orremove
thetankfromthemachineandpourthefuelout
ofthetankllspoutintothefuelcontainer.
Note:Ifyouremovethefueltank,alsoremove
thefuelandreturnhosesfromthetankbefore
removingthetank.
2.Replacethefuellter;refertoReplacingthe
FuelFilter(page50).
3.Flushthetankwithfresh,cleanfuel,ifnecessary.
4.Installthetankifyouremovedit.
5.Fillthetankwithfresh,cleanfuel.
ElectricalSystem
Maintenance
ElectricalSystemSafety
•Disconnectthebatterybeforerepairingthe
machine.Disconnectthenegativeterminalrst
andthepositivelast.Connectthepositiveterminal
rstandthenegativelast.
•Chargethebatteryinanopen,well-ventilated
area,awayfromsparksandames.Unplugthe
chargerbeforeconnectingordisconnectingthe
battery.
•Wearprotectiveclothinganduseinsulatedtools.
LocatingtheFuses
Thereare2fuseblocksand1emptyslotinthe
electricalsystem.Theyarelocatedbeneaththeseat
(Figure48).
g023046
Figure48
1.Battery2.Fuseblocks
ServicingtheBattery
Important:Donotjumpstartthebatteryofthe
machine.
Alwayskeepthebatterycleanandfullycharged.Use
apapertoweltocleanthebatteryandbatterybox.If
thebatteryterminalsarecorroded,cleanthemwith
asolutionof4partswaterand1partbakingsoda.
Applyalightcoatingofgreasetothebatteryterminals
topreventcorrosion.
Voltage:12Vwith280coldcrankingAat0°F
RemovingtheBattery
1.Positionthesprayeronalevelsurface,engage
theparkingbrake,shutoffthesprayerpump,
shutofftheengine,andremovethekey.
51