12
clear cycles on parameter
Clearing a parameter knob will delete all automation made on the parameter.
Hold [ CLEAR ] and press ( KNOB ).
arrange cycles
COPY cycle: [ CTRL ] + [ COPY ] + [ VALUE 1-16 ]
CLEAR cycle: [ CLEAR ] + [ VALUE 1-16 ]
reset cycles
When reset cycles is enabled, all modulations will reset at the beginning of each cycle. This includes
random modulation, voicing, range, accent, and timing.
Press [ CTRL ] and turn the ( STEPS ) knob to toggle between reset or no reset.
Random determines the probability of skipping cycles. If the modulation amount is positive, cycles
are skipped in a forward direction. If the amount is negative, preceding cycles are repeated.
Press ( RANDOM ) + turn ( CYCLES )
To Next Page
Loading...
