5
play button
Starts playback of the T-1. When T-1 is playing, the [ PLAY ] button ashes in WHITE at every quarter note,
indicating playback. When T-1 has joined a Link session, the ashing light turns ORANGE – indicating that
T-1 is synchronized with other peers in the Link session.
Control playback of synced devices. Send external MIDI or Link start/stop messages by pressing
[ CTRL ] + [ PLAY ]
Kill stuck notes by pressing [ CLEAR ] + [ PLAY ]
ctrl button
The [ CTRL ] button is used to access secondary functions of knobs and buttons.
Press and hold the [ CTRL ] button in combination with the desired knob or button to access the second-
ary function.Secondary button functions are labeled in gray on the front panel.
tracks
In the track overview, pressing a [ VALUE ] button selects the active track. The active track(s) is indicated with
ORANGE for note tracks and CYAN for CC tracks. Turning the knobs makes changes to this track. Playing tracks
are FLASHING and the muted tracks are indicated with DARK BLUE.
Link to tutorial video: torsoelectronics.com/tutorials/t1/tracks-patterns-banks
note tracks and cc tracks
Tracks can exist in two different modes: NOTE and CC. The mode is toggled by holding [ CTRL ] and press-
ing a [ VALUE ] button.
When tracks are in NOTE mode, the knobs change parameters for note generation as described in the
following sections.
When tracks are in CC mode, the knobs ( STEPS ) - ( PITCH ) and ( REPEATS ) - ( SCALE ) send MIDI
control change messages instead of controlling parameters. The control numbers are xed to CC numbers
#70 - #83 and each knob can be modulated by ( RANDOM ). The ( CHANNEL ) knob sets the MIDI channel
of both CC and note messages.
/1 /2 /4
/3
/8
/6
/16 /32 /64
/12 /24 /48
chrom
major
minor
penta
hira
iwato
tetra
user
To Next Page
Loading...
