Torso Electronics T-1 - 3.2 Euclidean Sequencing Concept

23
RANDOMNESS
T-1 can add randomness to all of the primary parameters (white label on frontpanel) i.e. everything from steps,
pulses, and division to MIDI channel and length. The randomness is based on a 16 step modulation sequence.
Each parameter for every track generates its own sequence when T-1 is started. The sequence can be changed
over time using a random walk algorithm, where each step changes randomly and gradually.
Random is the amount of change of the modulation sequence.
Rate is the speed of the modulation sequence.
Link to tutorial video: torsoelectronics.com/tutorials/t1/random-modulation
add random modulation
Press and hold the ( RANDOM ) knob and then turn another knob you want to add random variations to.
The amount of random variations applied to the parameter ranges from -100% to 100% and is shown in RED on
the [ VALUE ] buttons.The DARK BLUE modier buttons phase shifts the random modulation. This is a great way
to explore musical structures.
/1 /2 /4
/3
/8
/6
/16 /32 /64
/12 /24 /48
chrom
major
minor
penta
hira
iwato
tetra
user