31
copy parameter
• Press and [ CTRL ] + [ COPY ] and press a ( KNOB ) to copy the parameter. Both the primary,
secondary, and random parameter on the knob is copied.
• The track that the parameter was copied is GREEN.
• Select the destination track(s) on the [ VALUE ] buttons.
• Release [ CTRL ] + [ COPY ] to return to default mode.
It is possible to paste to multiple destinations before releasing [ CTRL ] + [ COPY ] buttons and return-
ing to default mode.
clipboard
Tracks, parameters, and patterns can be copied to the clipboard by double tapping the track/knob/pattern
while holding [ CTRL ] + [ COPY ]. The copied item ashes GREEN and [ CTRL ] + [ COPY ] can now be
released. When items are copied to the clipboard, the [ CLEAR ] button is permanently GREEN for tracks/
parameters and BLUE for patterns.
Items from the clipboard can be pasted by holding [ CLEAR ] and pressing the destination track/pattern on
the [ VALUE ] buttons. The destination [ VALUE ] ashes GREEN after pasting.
The clipboard is cleared by double tapping [ CLEAR ].
Use the clipboard to copy tracks/parameters between patterns/banks and patterns between banks.
The clear functionality of the [ CLEAR ] button is not available when there are items in the clipboard.
To Next Page
Loading...
