Toshiba 40E220U - Automatic Powerdown; No Signalpowerdown

IO0
UsingtheTV'sfeatures
Automatic Power Down
3 Press the (4 _ arrow) buttons to select On or Off, and press
EXIT.
AutomaticPowerDown
2
3
The TV can be configured to automatically turn itself off after 4
hours if you do not operate the TV either from the remote control or
the TV control panel.
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
Press the (&/y arrow) buttons to select Automatic Power
Down.
Press the (_1!/_,arrow) buttons to select On or Off, and press
EXIT.
NOTE Thedefaultsettingof thisfeatureis Off.
OneminutebeforetheTVswitchesto standby,awarningmessage
willappear.
Whenthefollowingfeaturesareset,thefeaturethatis setforthe
nearesttimewillfunction.
•:. AutomaticPowerDown
•:. SleepTimer
•:. Nosignalautopoweroff(after15minutesofno signal)
NoSignalPowerDown
The TV will automatically turn itself off"after 15 minutes when no
signal is detected.
o*,o You can change the setting to Off for the following purposes:
o*,o Low signal strength of analog channel (no signal detection)
o*,o Only Audio L/R is connected to external input to listen to
music through the TV speakers.
To change the no signal power down setting:
1 From the Preferences menu, highlight Energy Saving
Settings andpress ENTER.
2 Press the (&/y arrow) buttons to select No Signal Power
Down and press ENTER.