Toshiba 40E220U - Setting the PC Audio

UsingtheTV'sfeatures (31
Using the PC settings jeature
*_,J !
NOTE Thescreenis disruptedmomentarilywhileadjustingthePCsettings.
Thisisnota signofmalfunction.
Mode. Description."
HorizontalPosition Movesthepictureleft!right.Theadjustmentrangeis within+10from
center.*
VerticalPosition Movesthepictureup/down.Theadjustmentrangeis within+10from
center.*
ClockPhase Helpsto reducenoiseandsharpenthepicture.Theadjustmentrangeis
within+16fromcenter.*
SamplingClocks Helpsto reducenoiseandminimizeperiodicverticalstripesonthe
screen.Theadjustmentrangeiswithin+10fromcenter.*
Reset Highlightthisitem,andthenpresstheENTERbuttontogetan
optimumadjustmentautomatically.
* The default settings and/or adjustment ranges may vary depending on the
input signal format.
SeltingthePCAudio
You can output or mute sound from your computer when
connecting it to your TV using the AUDIO IN terminal and PC
audio cable.
To set the PC Audio:
1
2
3
Press the MENU button and open the Sound menu.
Highlight Audio Setup, and then press the ENTER button.
Press the (A/V arrow) buttons to select PC Audio, and then
press the (@/_ arrow) buttons to select No or Yes.
o*,o Yes: When viewing the PC input, the audio from the PC
Audio input can be heard.
°,*o No: When viewing the PC input, there will be no audio.
NOTE BecausethePCandHDMI1inputssharethesamesetofanalog
audioinputs,the PCAudiomenusettinginfluencestheHDMI1
Audiomenusetting.If PCAudiois setto"No"theHDMI1Audio
settingchangesto "Auto."IfPCAudiois setto"Yes"theHDMI1
Audiosettingis setto "Digital"andisgrayedoutinthemenu.(See
also"SettingtheHDMI®audiomode"onpage50)