ConnectingYourTV 25
Omnecting a DVD player with O)lorStream ® (component
NOTE Theunauthorizedrecording,use,distribution,orrevisionof
televisionprograms,videotapes,DVDs,andothermaterialsis
prohibitedundertheCopyrightLawsoftheUnitedStatesandother
countries,andmaysubjectyouto civil andcriminalliability.
ConnectingaDVDplayerwithColorStream®
(componentvideo),aVCR,andasatellitereceiver
NOTE ColorStream®andcompositevideo cablescannot be
connectedsimultaneously.
Fromantenna
TVbackpanel StereoVCR
_,,_ _,_ ,.?,_;_, ,.....C_
Fromsatellitedish _ _ _
............... __ _ \ 7Y
Satellitereceiverwithcomponentvideoor
DVDplayerwithcomponentvideo
(Sample Illustration) Satellite _z_ceiver with component video or
DVD player
Items needed:
o:. Coaxial cables
o:. Standard AV cables
If you have a mono VCR, connect L/MONO on the TV to your
VCR's audio out terminal using the white audio cable only.
Standard audio cables
Component video cables
o:o You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to the
COLOR STREAM HD terminal in the TV. The COLOR
STREAM HD terminal can be used to display Progressive
(480p, 720p) and Interlaced (480i, 1080i) scan systems.
Please note that 1080p is not supported. Check the User's
Guide of the DVD player in order to determine the best
output signal available.
To Next Page
Loading...
