Toshiba 40E220U - Connecting a VCR, antenna, cable TV, or camcorder

4 ConnectingYourTV
(_mnecting a VCR, antenna, cable TV,or can_'order
ConnectingaVCR,antenna,cableTV,orcamcorder
FromcableTV FromcableTV
orantenna Cablebox
TVbackpanel StereoVCR !
I:__ _i" _ _@,
(Sample Illustration) Connecting to a VCR, amenna, cable TV, or
camcorder
Items needed:
•:* Coaxial cables
•*,o Standard AV cables
If you have a mono VCR, connect L/MONO on the TV to your
VCR's audio out terminal using the white audio cable only.
•_o Standard audio cables
NOTE WhenyouuseaCablebox,youmaynotbeabletousethe remote
controltoprogramoraccesscertainfeaturesontheTV.
To view the antenna or cable signal:
Select ANT/CABLE video input source on the TV.*
To view basic and premium cable channels:
Turn OFF tile VCR. Select tile ANT/CABLE video input source on
the TV.* Tune the TV to channel 3 or 4 (whichever channel the
Cable box output is set to). Use the Cable box controls to change
channels.
To view the VCR or camcorder video:
Turn ON the VCR or camcorder video. Select VIDEO input source
on the TV.*
*To select the video input source, press the INPUT button on the
remote control, see "Selecting the video input source" on page 54.