8 UsingtheTV'sfeatures
Agtjusting the audio
To listen to an alternate language on an ATSC digital station (if
available), highlight the Language field in step 3 above, and then
press the (4/_ arrow) buttons to select the language you prefer.
To listen to a second audio program on an analog station, if
available, select SAP in step 3 above.
NOTE o:oAsecondaudioprogram(SAP)canbeheardonly onthoseTV
stationsthatofferit. Forexample,a stationmightbroadcast
anotherlanguageasa secondaudioprogram.IfyouhaveSAP
on,youwill seethecurrentprogramonthescreenbuthearthe
otherlanguageinsteadof theprogram'snormalaudio.
o:o IfyouhaveSAPonandthestationyou arewatchingisnot
broadcastinga secondaudioprogram,thestation'snormal
audiowill beoutput.However,occasionallythereis nosoundat
all inSAPmode.Ifthishappens,settheMTSfeatureto Stereo
mode.
Adjustingtheaudioqualily
You can adjust the audio quality by adjusting the bass, treble and
balance.
To adjust the audio quality:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Settings, and then press the ENTER button.
3 Press the (A/Y arrow) buttons to highlight the item you wish
to adjust (Bass, Treble, or Balance).
4 Press the (_/_ arrow) buttons to adjust the level.
o*,o @ makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
o*,o _ makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
To Next Page
Loading...
