8 UsingtheW's features
Sovlling the TheaterWide® picture (TheaterWide 2 and 3 onl30
DotbyDot
This setting is for viewing VGA, SVGA, XGA, WXGA, and
SXGA sources.
(Sample Illustration) Picture size - Dot by Dot
Dot by Dot is a non-scaling display. Depending on the input signal
format (VGA, for example) the picture may appear with sidebars
and/or bars at the top and bottom.
ScrollingtheTheaterWide®picture
(TheaterWide2 and3only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1 Press the MENU button and open the Picture menu.
2 Highlight Theater Settings, and then press the ENTER
button.
(Sample Image) Picture menu - Theater Settings selection
3 In the Picture Size field, select either TheaterWide 2 or
TheaterWide 3
NOTE Youcannotscrollinanyothermode.
4 Press the (y arrow) button to select the Picture Scroll field.
5 Press the (4/_ arrow) buttons to scroll the picture up and
down as needed.
To Next Page
Loading...
