8 C0nneelingYourTV
(_mnecling an HDMI® or DVI device to the HDMI® input
To view the HDMI ®device video:
Select HDMI 1 or HDMI 2 video input source on the TV. Press the
INPUT button on the remote control. For more information, see
"Selecting tile video input source" on page 54.
To connect a DVI device, you will need:
o:o HDMI ®to DVI adapter cable
For proper operation, tile length of an HDMF _to DVI adapter
cable should not exceed 9.8 ft (3m). Tile recommended length
is 6.6 ft (2m).
o:. 3.5mm Stereo to RCA Y-cable
An HDMI <'_to DVI adapter cable transfers video only. Separate
analog audio cables are required (see illustration).
For more information, see "Setting tile HDMI® audio mode"
on page 50
NOTE ToensurethattheHDMI®or DVIdeviceis resetproperly:
o:. Whenturningonyourelectroniccomponents,turnontheTV
first,andthentheHDMI®orDVldevice.
o:. Whenturningoffyourelectroniccomponents,turnoffthe
®
HDMI orDVldevicefirst,andthentheTV.
To Next Page
Loading...
