Toshiba 40E220U - Page 31

ConnectingYourTV 31
Connecting a digital audio system
3 Press the (&/y arrow) buttons to highlight Audio Setup, and
then press the ENTER button.
(Sample Image) Audio Setup screen
4
5
Press the (A/Y arrow) buttons to select Optical Output
Format.
Press the (4/_ arrow) buttons to select either Dolby Digital or
PCM, depending on your device, see "Selecting the optical
audio output format" on page 79.
(Sample Image) Digital Output Format scree_
6 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.
NOTE .:o SomeaudiosystemsmaynotbecompatiblewithDolbyDigital
bitstreamsignals.Olderaudiosystemsthatarenotcompatible
withstandardopticaloutsignalsmaynotworkproperly,creating
ahighnoiselevelthatmaydamagespeakersor headphones.
THISDAMAGEISNOTCOVEREDBYYOURWARRANTY,
¢ TheDIGITALAUDIOOUTterminalmaynotoutputsomedigital
audiosourcesbecauseof copyrestrictions.