Usingthe TV's features _
Selecting the video input source
IJ IJ
The current signal source displays in the top right corner of the
Input Selection screen.
(Sample Image) b_put Selection screen
NOTE o:oYoucanlabelthevideoinputsourcesaccordingto thespecific
devicesyouhaveconnectedtotheTV,see"Labelingthevideo
inputsources"onpage56.
¢ Sourcescanbe"hidden,"see"Labelingthevideoinputsources"
on page56.
¢ "Novideosignal"will appearrandomlyonthescreenif no
signalisreceivedin videoinputmode.
¢ IfCECdeviceis connectedto anHDMI®input,the
REGZA-LINK®iconappears.
If a REGZA-LINK _ device with HDMI <'*switching capability
(e.g. Audio Receiver) is connected to the HDMI <'_input, press the
INPUT button on the remote control or TV control panel
repeatedly to highlight HDMI 1 or HDMI 2.
If the connected CEC device has any connected devices, a separate
device selection pop-up window appears:
HDMI I 1 Audio Receiver
(Sample Illustration) HDMF _setting pop-up window
Press the INPUT button repeatedly to highlight the desired input
source, and then press the ENTER button.
To Next Page
Loading...
