Toshiba B-SA4T User Manual

- 11 -
 How to open the Properties with the administrative privilege
To change some of the settings under Windows Vista/Server2008, the administrative privilege is necessary.
Right-click the printer icon, select the “Run as administrator “, and click the “Properties”.
Note: The “User account control” dialog box may be displayed. In that case, click the [Allow].
 How to set up Windows Vista/Server2008/7/Server2008R2/8/Server2012/Server2012R2/10
again
If you uninstall the printer driver, set up the Windows again. This should be also conducted when the
installation does not succeed.
1. Select the “Start”, “All programs”, “TOSHIBA
TEC”, “TPCL Printer Driver”, and “TECDRVIN”.
Note: Log on as the user with administrative
privilege.
The “User account control” dialog may be
displayed. In that case, click the [Allow].
2. When the screen on the right appears, click the
[Install] button.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless