Toshiba B-SA4T User Manual

- 21 -
14. Select whether or not to perform a print test,
then click the [Next] button.
15. When the “Completing the Add Printer Wizard”
is displayed, click the [Finish] button.
16. When the screen on the right appears, click the
[Continue Anyway] button.
Note: “Digital Signature Not Found” message may
be displayed. In that case, click the [Yes]
button.
17. Installation of the printer driver starts.
18. When the installation is completed, a new printer icon will be added to the “Printer” folder.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless