- 81 -
Erase Memory
When the “Erase Memory” is clicked, the screen
on the right is displayed to enable formatting the
specified flash memory. When the [OK] button is
clicked, the memory format is executed.
Ribbon Settings
When the “Ribbon Settings” is clicked, the screen on the
right appears to enable fine adjustment of the ribbon motor
voltages. Adjusting the ribbon motor voltage is effective to
improve ribbon slack or wrinkles.
Before changing the default settings, refer to the manual of
each printer model. When the [OK] button is clicked, the
changes are sent to the printer.
Driver
Driver Options
Administration tab
Enables saving the settings of this printer driver
in a file or importing the settings into a different
or freshly installed printer driver. It also allows
importing previously saved settings to replace
the current settings of this printer driver.
Import: Allows reading the checked items from
the “Driver Setting File (*.sds)” to replace the
current settings. The files of the older versions
having a file extension of “sfm”, “sbf”, “spr”, or
“sdm” can be also used, however, a part of the
items cannot be replaced.
Export: Allows saving the checked items in a
“Driver Setting File (*.sds).
To Next Page
Loading...
Need help?
General
