Toshiba B-SA4T User Manual

- 90 -
• When a control code or special code is used with the bar code font specified, refer to the following table
and enter the corresponding data.
In the case a caret “^” is used, enter “^^” because the caret “^” is the default function character. If the
function character is changed from “^” to the other in the [User Commands] of the [Advanced Options],
replace the “^” with the specified character.
Control code
Input data
Control code
Input data
Control code
Input data
>@ (00H)
N/A
>P (10H)
^<DLE>
>0
>
>A (01H)
^<SOH>
>Q (11H)
^<DC1>
>1
^<DEL>
>B (02H)
^<STX>
>R (12H)
^<DC2>
>2
^3
>C (03H)
^<ETX>
>S (13H)
^<DC3>
>3
^2
>D (04H)
^<EOT>
>T (14H)
^<DC4>
>4
^s or ^S
>E (05H)
^<ENQ>
>U (15H)
^<NAK>
>5
^c or ^C
>F (06H)
^<ACK>
>V (16H)
^<SYN>
>6
^b or ^B
>G (07H)
^<BEL>
>W (17H)
^<ETB>
>7
^a or ^A
>H (08H)
^<BS>
>X (18H)
^<CAN>
>8
^1
>I (09H)
^<HT>
>Y (19H)
^<EM>
>J (0AH)
^<LF>
>Z (1AH)
^<SUB>
>K (0BH)
^<VT>
>[ (1BH)
^<ESC>
>L (0CH)
^<FF>
>\ (1CH)
^<FS>
>M (0DH)
^<CR>
>] (1DH)
^<GS>
>N (0EH)
^<SO>
>^ (1EH)
^<RS>
>O (0FH)
^<SI>
>_ (1FH)
^<US>

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless