Toshiba e-studio 160 - SLG Board Functions; High Quality Image Processing - Filtering; Image Memory Editing

1
2
3
4
5
6
7
9
10
11
12
8
5-22
PROGRAM MENU
FINISHING
1
Press the key to enter the program menu.
2
Select “01.DEFAULT SETTINGS” and press the
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.MACHINE DEFAULT
02.COPY SETUP
03.FAX SETUP
3
Select “02.COPY SETUP” and press the key.
COPY SETUP
02.IMAGE MODE
03.LIGHT/DARK
04.FINISHING
4
Select “04.FINISHING” and press the key.
5
Select a paper ejection method and press the
key.
• The selected paper ejection method is set as the default.
Then the screen returns to the COPY SETUP screen.
Tip
• "2.NON SORT/OFFSET" and "4.SORT/OFFSET" can be
selected only when the Offset Tray or Finisher is installed.
• "5.ALTERNATION" can be selected only when the Paper
Feed Unit or Stack Feed Bypass is installed.
• "5.ALTERNATION" cannot be selected when the Finisher is
installed.
• "6.STAPLE" is selectable only when the Finisher (optional)
is attached to the e-STUDIO200/250.
6
Press the key to return to the initial screen for
copying.
Tip
"03. FAX SETUP" can be selected only when the FAX option
is installed.
FINISHING
1.NON SORT
2.NON SORT/OFFSET
3.SORT
4.SORT/OFFSET
5.ALTERNATION
6.STAPLE
6. COPY SETUP (Cont.)