5-5
1
2
3
4
5
6
7
9
10
11
12
8
Automatic Sleep
If the digital multi function system remains idle (Default: 10 minutes with the e-STUDIO160 and 45 minutes
with the e-STUDIO200/250) after entering Automatic Low Power mode as explained on the previous
page, the digital multi function system shifts to the Super Energy Saver mode. The LED turns
on and the message display goes blank. This mode saves more power than the Auto Lower Power mode.
If there are documents in the automatic document feeder or the original cover is open; the machine
enters the Sleep mode and “Sleep mode” appears on the message display.
6
Select the desired Automatic Sleep Time by using
the or key.
• Select the waiting time from the following:
3, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90,
100, 110, 120, 150, 180, 210 or 240 minutes.
How to Change the Sleep Time
5
Select “3. AUTO SLEEP” and press the key.
TIMERS
AUTO 240MIN
SLEEP: 45
3MIN
TIMER
1.AUTO CLEAR
2.AUTO LOW POWER
3.AUTO SLEEP
MACHINE DEFAULTS
01.CASSETTE SIZE
02.WALKUP SCREEN
03.TIMERS
3
Select “01. MACHINE DEFAULTS” and press the
key.
PROGRAM
01.MACHINE DEFAULTS
02.COPY SETUP
03.FAX SETUP
Tip
"03. FAX SETUP" can be selected only when the FAX option
is installed.
1
Press the key to enter the program menu.
2
Select “01. DEFAULT SETTINGS” and press the
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
Tip
"02. WALKUP SCREEN" can be selected only when the FAX
option is installed.
4
Select “03. TIMERS” and press the key.
To Next Page
Loading...
