1
2
3
4
5
6
7
9
10
11
12
8
6-2
FINISHING MODE SELECTION
1. FINISHING MODE SELECTION
Offset Tray (option)
When the Offset Tray is configured, the copied set are collated
or stacked in groups with each set offset.
Job Separator (option)
The job separator function allows a copied job and an optional
fax job to be output onto separate paper trays.
Stapler (option)
Sets of copies can be manually stapled when the stapler with
work surface is attached.
Finisher (option for e-STUDIO200/250 only)
When the Finisher is attached, the OFFSET, SORT/OFFSET,
and STAPLE functions become available.
Trays
Paper
stopper
Note
When longer paper, such as Ledger size, is designated to
output onto the lower tray, please use the paper stopper
attached to the Job Separator. (Do not use the paper stopper
attached to the lower tray.)
To Next Page
Loading...
