Toshiba e-studio 160 - Outline of the Machine; Location of Electrical Parts - Sensors, Switches, Clutches (B-3)

1
2
3
4
5
6
7
9
10
11
12
8
1-8
BEFORE MAKING COPIES
Changing the Paper Size of the Cassette
The paper size of the digital multi function’s cassettes can be changed to appropriate paper sizes using
the following procedure.
3
Push the right (unlock) side of the size selection
lever to unlock it.
4
While pushing the size selection lever in the direction
of the arrow, set the side guide to the desired paper
width (as indicated on the bottom surface of the
cassette).
2
Move the width guide to the desired paper size
position (as indicated on the bottom surface of the
cassette).
1
Pull the cassette out until it stops.
3. PAPER (Cont.)