Toshiba e-studio 160 - Outline of the Machine; Sectional View - Rear View

1
2
3
4
5
6
7
9
10
11
12
8
1-2
BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
Automatic document feeder (MR-2012)
Reversing automatic document feeder (MR-3011)
Stapler (KK-1600)
Job separator (MJ-5001)
Offset tray (MJ-5002)
Automatic duplexing unit (MD-0101)
Stack feed bypass (MY-1016)
Paper feed unit (MY-1015)
Paper feed pedestal (KD-1009)
e-STUDIO160
e-STUDIO200/250
Stapler (KK-1600)
Automatic duplexing unit
(MD-0101)
Stack feed bypass
(MY-1016)
Automatic document feeder (MR-2012)
Reversing automatic document feeder (MR-3011)
Finisher including Transportation
bridge (MJ-1011)*
(e-STUDIO200/250 only)
Paper feed unit (MY-1015)
Large Capacity Feeder
(KD-1010)**
(e-STUDIO200/250 only)
* The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher.
** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010).
Furthermore, the Cassette module (MY-1017) (option for e-STUDIO200/250) can be installed in
KD-1009.