Toshiba e-studio 160 - Disassembly and Replacement (Printing); Laser Scanner Unit Removal

1
2
3
4
5
6
7
9
10
11
12
8
7-24
WHEN THE GRAPHIC SYMBOL FLASHES
6. REMOVING JAMMED STAPLES
Finisher (option for e-STUDIO200/250)
1
Perform steps 1 and 2 of the procedure for “6.
ADDING STAPLES Finisher ”( Page 7-20).
3
Remove any jammed staples using your fingertip or
something sharp.
4
Holding the knob, return part to its original
position.
A
A
2
Holding the knob, lower part .
5
Return the staple cartridge to its original position.
• Insert the cartridge until it is caught by the claw and fixed
with a click sound.
6
Attach the finisher to the digital multi function
system.