4-9
1
2
3
4
5
6
7
9
10
11
12
8
9
7
5
3
1
Note
This copying mode requires the reversing automatic document feeder (optional) to be installed.
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the key.
3
Select “2 > 1” by pressing the key.
Then press the key. Press the key to return
to the initial screen for copying.
4
Select the desired paper cassette, reproduction
ratio, image density and copy quantity.
• The automatic paper selection mode is selected as the
default mode.
5
Place the originals on the feed tray.
6
Press the key.
READY 1
DUPLEX :1 > 1
DUAL TYPE :OFF
IMAGE SHIFT :OFF
2-Sided Originals > 1-Sided Copies
How to place originals
Always set originals vertically. If originals are set horizontally,
the copies will be output upside down alternately.
9
7
5
3
1
DUPLEX 1
Original > Copy
2 > 2
2 > 1
To Next Page
Loading...
