Toshiba e-studio 160 - General Description of CCD Control; Photo-voltaic Conversion

1
2
3
4
5
6
7
9
10
11
12
8
6-10
FINISHING MODE SELECTION
6. STAPLING
When the optional finisher is installed, you can use the function that automatically staples Maximum
capacity for stapling.
LT, LT-R (A4, A4-R) 30 sheets
LG 20 sheets
LD, COMP 15 sheets
When the optional finisher is installed (option for e-STUDIO200/250)
ABAB
AB
Finish
Set on the Automatic
Document Feeder
Placed on the glass
1
Place the originals in the feeder.
3
Select the “STAPLE” mode.
• Select “STAPLE” from the FINISHING menu by pressing
the
key. Then press the key.
4
Key in the desired copy quantity using the numeric
keys.
5
Select the desired image density and reproduction
ratio.
6
Press the key.
• The digital multi function system starts copying. In this
copying mode, Stapled each set of copies are ejected.
2
Press the key. The “FINISHING” screen appears.
When Using the Automatic Document Feeder
READY 1
FINISHING:
NONSORT/OFFSET
ALTERNATION
STAPLE