Toshiba e-studio 160 - Copying Process; Copying Process Overview

3-13
1
2
3
4
5
6
7
9
10
11
12
8
3. COPYING WITH COPY DENSITY SELECTION
There are two types of image density: automatic mode and manual mode.
In the automatic mode, the digital multi function system automatically detects the density of the original
and selects the optimum image density for it.
In the manual mode, the user can produce lighter or darker copies.
Copying in the Automatic Mode
1
Make sure that “ : AUTO” is displayed in the
message display.
• If “ , ” “NORMAL” or “ ” is displayed, press the key
and select “AUTO”.
2
Place the original and press key.
• The digital multi function system automatically detects the
density of the original, and makes copies at the optimum
exposure.
Copying in the Manual Mode
1
Press the key.
2
Press the or key to select the desired image
density.
• To produce lighter copies, press the key. Each time you
press the
key, the density-indicating mark moves one
step to the left and your copies are produced proportionally
lighter.
• To produce darker copies, press the
key. Each time
you press the
key, the density-indicating mark moves
one step to the right and your copies are produced
proportionally darker.
READY 1
PAPER :
LT :AUTO
FINISHING :SORT ZOOM :100%
EDIT
LIGHT/DARK 1
AUTO:
MANUAL:
-3 -2 -1 +1 +2 +30