1
2
3
4
5
6
7
9
10
11
12
8
6-12
FINISHING MODE SELECTION
• To position the staple in parallel with the copy’s top edge,
align them to the guide in the diagonal direction.
When sets of copies are inserted aligned to the guide, they will be stapled automatically. The stapling
direction varies depending on the orientation of the sets. This function is only available when the optional
Stapler kit (KK-1600) is installed.
• To staple sets of copies diagonally, align them to the guide
in the front.
6. STAPLING (Cont.)
When the optional Stapler kit is installed
To Next Page
Loading...
