1
2
3
4
5
6
7
9
10
11
12
8
5-10
PROGRAM MENU
4. SPEAKER VOLUME
Adjust the volume of the alarm and key touch tones.
1
Press the key to enter the program menu.
2
Select “01.DEFAULT SETTINGS” and press the
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.MACHINE DEFAULTS
02.COPY SETUP
03.FAX SETUP
3
Select “01.MACHINE DEFAULTS” and press the
key.
MACHINE DEFAULTS
03.TIMERS
04.WEEKLY TIMER
05.SPEAKER VOLUME
4
Select “05.SPEAKER VOLUME” and press the
key.
SPEAKER VOLUME
1.ALARM VOLUME
2.KEY TOUCH VOLUME
3.RINGER VOLUME
5
Select the desired volume control and press the
key.
6
Press the or key to adjust the volume of
the beep tone.
• Adjust the volume of the beep tone in eight levels: 0 to 7.
ALARM VOLUME
VOLUME: 7
0
0
7
Press the key.
• The screen returns to SPEAKER VOLUME Selection.
8
Repeat steps 5 to 7 to adjust the volume of other
tones, as necessary.
9
Press the key to return to the initial screen for
copying.
Tip
"3. RINGER VOLUME" and "4. MONITOR VOLUME" can be
selected only when the optional FAX board is installed.
To Next Page
Loading...
