Toshiba e-studio 160 - Copying Process; Details of Copying Process - Fixing and Cleaning

4-3
1
2
3
4
5
6
7
9
10
11
12
8
1-Sided Originals > 1-Sided Copies (default setting)
This copy mode is selected as the default setting when the digital multi function system is turned on. To
change use the following procedures.
1
Press the key on the control panel while in the
initial screen for copying.
• The “EDIT MENU” screen appears.
3
Select “1>1” by pressing the key.
Then press the key. Press the key to return
to the initial screen for copying.
Tip
The menu that appears here varies depending on whether
the auto-duplexer unit (optional) and the reversing automatic
document feeder (optional) are installed or not.
2
Confirm that “DUPLEX” is highlighted on the screen.
Press the key.
6
Press the key.
5
Place the original(s) on the feed tray or on the glass.
4
Select the desired paper cassette, reproduction ratio,
image density and copy quantity.
READY 1
DUPLEX :1 > 1
DUAL PAGE :OFF
IMAGE SHIFT :OFF
DUPLEX 1
Original > Copy
1 > 1
1 > 2