Toshiba e-studio 160 - Reduction and Enlargement Copying

1
2
3
4
5
6
7
9
10
11
12
8
3-8
BASIC MENU
2. REDUCTION AND ENLARGEMENT COPYING
There are four methods available for enlargement and reduction copying.
• Using Automatic Magnification Selection (AMS):
After selecting the AMS mode and copy size, the digital multi function system automatically detects
the size of the original and calculates the appropriate reproduction ratio. For the e-STUDIO160, when
the original is scanned on the glass, the user must to manually specify the size of the original.
• REDUCE/ENLARGE:
When a regular-sized original and copy paper are used, select a ratio corresponding to the paper size.
Selectable Ratio:
Using Automatic Magnification Selection (AMS)
1
Press the key.
• ZOOM UP/DOWN:
The Down and Up arrow keys select the desired reproduction ratio at 1% increments.
• XY ZOOM:
This function allows you to alter the reproduction ratio in the X and Y directions of your copies.
* Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with
dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of
automatic magnification selection. For these types of originals, use the reduction/enlargement modes.
Paper
Original
LD
LG
LT
ST
LD
100
121
129
200
LG
78
100
100
154
LT
65
78
100
129
ST
50
60
65
100