Toshiba e-studio 160 - Printing - Structure; Lenses, HSYNC Detection, and Laser Drive PWA

1
2
3
4
5
6
7
9
10
11
12
8
7-22
WHEN THE GRAPHIC SYMBOL FLASHES
5. ADDING STAPLES (Cont.)
Be sure to turn off the digital multi function system before replacing the staples.
1
Slide forward and lift up the staple cover.
2
Pull out the staple cartridge.
3
Press the cartridge knob to remove the empty staple
case.
4
Insert a new staple case into the cartridge.
• Do not peel off the sticker from the staple case before
inserting the staple case into the cartridge.
Staple kit (option)