1
2
3
4
5
6
7
9
10
11
12
8
9-4
MAINTENANCE
2. CLEANING THE WIRE (Cont.)
Cleaning the transfer charger wire
1
Making sure that the stack feed bypass and the
automatic duplexing unit (if installed) are opened,
open the side cover.
2
Clean the transfer charger wire using the attached
charger cleaning accessory.
3
Close the side cover, automatic duplexing unit and
stack feed bypass.
When any of the following is generated on the copy, clean the transfer charger wire.
• White lines in the direction of paper feed.
• Uneven tone or dim images.
BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire.
To Next Page
Loading...
