1
2
3
4
5
6
7
9
10
11
12
8
1-12
BEFORE MAKING COPIES
7
Repeat steps 4 to 6 to specify the paper size for other
paper cassettes, as necessary.
8
Press the key to return to the initial screen for
copying.
3. PAPER (Cont.)
Tip
After setting the paper size of the stack feed bypass, if the
key is pressed while paper are not placed on the
stack feed bypass or the auto clear time has passed, the setting
is returned to its initial condition (paper size setting is cleared)
for resetting.
In this case, perform the setting again.
If paper are placed on the stack feed bypass during the initial
condition, the screen of step 6 appears and you can set the
paper size from this step.
To Next Page
Loading...
