Toshiba e-studio 160 - Copy Paper Path; Normal Paper Path; Paper Path with Optional Feed Units

2-3
1
2
3
4
5
6
7
9
10
11
12
8
2
Set the desired copy modes.
• The automatic paper selection (APS) mode, automatic
image density mode and copying of one original are the
default settings.
3
Press the key.
• The message “COPYING” appears. The digital multi
function system starts copying. After completion of the
copying, the message “READY” appears again.
• For the e-STUDIO160, when an original is scanned from
the glass, a message appears prompting you to specify
the size of the original that you would like to copy.
Use the
or key to specify the size of the
original. Then press the
key. The machine will start
copying.
COPYING 1
PAPER :
LT-R :AUTO
FINISHING :SORT :100%
Select original size 1
LT
LD
LT-R
LG
ST-R