The United States Environment Protection Agency (EPA) has introduced a voluntary ENERGY STA R
Program to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an
ENERGY STAR Partner, the
TOSHIBA TEC CORPORATION has determined that this copier model meets the ENERGY STA R
guidelines for energy efficiency.
For Copier+Printer or FAX models,
ENERGY STAR guidelines require ENERGY STAR Multifunction
copiers to have a ‘Sleep Mode’ feature that automatically makes the copier enter the sleep mode after a
period of inactivity. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy
Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements:
e-STUDIO160/200/250 Copier + Printer model (Base model)
‘Sleep Mode (Super Energy Saver Mode)’-
The copier consumes less than 5 watts in the ‘Sleep Mode (Super Energy Saver Mode)’.
‘Sleep Mode (Super Energy Saver Mode)’ Default Time-
The default time for the ‘Sleep Mode (Super Energy Saver Mode)’ is 25 minutes (e-STUDIO160)/
60 minutes (e-STUDIO200/250).
‘Low Power Mode’-
The copier consumes less than 111.6 watts (e-STUDIO160)/127.0 watts (e-STUDIO200)/146.25
watts (e-STUDIO250) during Energy Save.
‘Low Power Mode’ Default Time-
The default time for the ‘Low Power Mode’ is 15 minutes.
e-STUDIO160/200/250 Copier + Printer or FAX models (Multifunction model)
‘Sleep Mode (Super Energy Saver Mode)’-
The copier consumes less than 70 watts (e-STUDIO160/200)/80 watts (e-STUDIO250) in the ‘Sleep
Mode (Super Energy Saver Mode)’.
‘Sleep Mode (Super Energy Saver Mode)’ Default Time-
The default time for the ‘Sleep Mode (Super Energy Saver Mode)’ is 25 minutes (e-STUDIO160)/
60minutes (e-STUDIO200/250).
‘Low Power Mode’-
The copier consumes less than 111.6 watts (e-STUDIO160)/127.0 watts (e-STUDIO200)/146.25
watts (e-STUDIO250) during Energy Save.
‘Low Power Mode’ Default Time-
The default time for the ‘Low Power Mode’ is 15 minutes.
Note 1- The default setting for the ‘Sleep Mode (Super Energy Saver Mode)’ and ‘Low Power Mode’ can
be changed. If you want to increase the default setting, contact your authorized Toshiba dealer.
Note 2- For Copier model (Base model), to restart the copier after an automatic shut-off, press the
SUPER ENERGY SAVER key.
Note 3- For Copier model (Base model), after an automatic shut-off, the weekly timer feature cannot be
activated. If you prefer to activate this feature, contact your authorized Toshiba dealer.
When an option of the FAX function is installed, for energy saving purpose, we recommend setting the
weekly timer.
In accordance with the EPA
ENERGY STAR Program guidelines, this copier is suitable for the use of
recycled copier paper (with up to 100% post consumer content) meeting the requirements as specified in
ENV 12281 (paper-printing and business paper-Requirements for copy paper for dry toner imaging
processes).
If you have questions regarding the use of recycled paper or some recommended types of recycled
paper, please contact your authorized Toshiba dealer.
ENERGY STAR is a U.S. registered mark.
EPA
ENERGY STAR ® (MFD)
To Next Page
Loading...
