Toshiba e-studio 160 - Removal and Reinstallation of Covers and PC Boards; PC Board Removal - High Voltage Power Supply; PC Board Removal - LVPS

1
2
3
4
5
6
7
9
10
11
12
8
3-10
BASIC MENU
2. REDUCTION AND ENLARGEMENT COPYING (Cont.)
Reduce/Enlarge
5
Move the cursor to the “COPY” by pressing the
key. Use the or key to select the paper
size and press the key.
• If the cassette of the selected paper size is ready, it will be
automatically selected. If it is not, the “No cassette of select
size” message is displayed and a priority cassette will be
selected.
• Even after the setting has been made, paper change is
possible by means of pressing the
key. However, as
for the magnification, the one remaining after setting will be
applied.
1
Place the original to be copied in the glass.
2
Press the key or key.
• Press the key and go to step 3,
or press the
key and go to step 4.
3
Use the or keys and select “REDUCE/
ENLARGE.” Press the key.
4
Use the or key to select the “ORIGINAL”
size.
READY 1
PAPER :
LT :AUTO
FINISHING :SORT ZOOM :78%
EDIT
When a regular-sized original and copy paper are used, select a ratio corresponding to them.
READY 1
ZOOM: AMS
REDUCE/ENLARGE
ZOOM UP/DOWN
REDUCE/ENLARGE 1
[ORIGINAL] [ COPY ]
LT LT
100%
REDUCE/ENLARGE 1
[ORIGINAL] [ COPY ]
LG LT
78%
6
Key in the copy the quantity and press the key.