1
2
3
4
5
6
7
9
10
11
12
8
4-22
EDIT MENU
Tip
In the annotation function, printing is performed along the lead-
edge of the paper selected. This may be the top or the side of
copy depending upon the orientation of the copy paper.
Therefore, place the original with its top facing the paper output
side of the machine.
6
Place the original on the glass and press the
key.
When Placing the Original on the Glass
7
Select “YES,” set the next original and press the
key.
Next Original? 3
YES
NO
Next Original? 3
YES
NO
Memory clear? 3
YES
NO
• While the “Next Original?” screen is being shown, if the
key is pressed, the scanned data is deleted, and
the ANNOTAION is terminated. Select “YES” or “NO,” and
press the key.
8
For the next and subsequent originals, repeat step
7 above.
9
When the last original is finished being scanned,
select “NO.”
10
Press the key.
7. ANNOTATION (Cont.)
Select original size 1
LT
LD
LT-R
LG
ST-R
• For the e-STUDIO160, when the automatic paper selection
(APS) mode or automatic magnification selection (AMS) is
selected, a message appears prompting you to specify the
size of the original that you would like to copy.
Use the
or key to specify the size of the
original. Then press the key. The digital multi function
system will start scanning the document.
• When the first original has been scanned, the “Next
Original?” screen appears.
To Next Page
Loading...
