1
2
3
4
5
6
7
9
10
11
12
8
4-28
EDIT MENU
Recalling a Stored Combination of Copy Modes
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Press the key to display “JOB MEMORY” in
reverse. Then press the key.
3
Press the key while “RECALL” is selected.
4
Select the desired Job number from “MEMORY1”
to “MEMORY4”. Then press the key. Press the
key to return to the initial screen for copying.
Tip
When the selected memory location contains a pre-
programmed job, the Job Memory icon is highlighted with a
box.
5
Place the original on the glass or the feed tray and
press the key. The original is copied in the
combination of modes you have recalled.
READY 1
EDITING :OFF
JOB BUILD :OFF
JOB MEMORY
JOB MEMORY 1
RECALL
MEMORY
MEMORY 1
MEMORY1
MEMORY2
MEMORY3
MEMORY4
11. JOB MEMORY (Cont.)
To Next Page
Loading...
