EasyManuals Logo

Toshiba e-studio 2330C Troubleshooting Guide

Toshiba e-studio 2330C
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 39
1 TROUBLESHOOTING FOR THE HARDWARE
7
Close the front cover of the Finisher.
Saddle Stitch Finisher MJ-1030 (optional)
5
Holding the knob, raise the guide, and return it to its
original position.
6
Fit the staple cartridge into the stapler.
When putting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
1
Open the front cover of the Finisher.
2
Remove the staple cartridge.

Table of Contents

Other manuals for Toshiba e-studio 2330C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-studio 2330C and is the answer not in the manual?

Toshiba e-studio 2330C Specifications

General IconGeneral
BrandToshiba
Modele-studio 2330C
CategoryAll in One Printer
LanguageEnglish

Related product manuals