Toshiba e-studio 2330C Troubleshooting Guide

1 TROUBLESHOOTING FOR THE HARDWARE
40 Clearing a Staple Jam
7
Close the front cover of the Finisher.
3
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the jammed staples.
5
Holding the knob, raise the guide, and return it to its
original position.
6
Fit the staple cartridge on the stapler.
Insert the cartridge until it is caught by the latch and fixed with a click.
A

Toshiba e-studio 2330C Specifications

General

Brand	Toshiba
Model	e-studio 2330C
Category	All in One Printer
Language	English